DVS Atomix HDMI Guide d'installation télécharger pdf (Page 27)

2-9

Overview

2.3 Overview of the Panels

To provide all the connection possibilities of the board at a computer

casing, several panels may have been delivered with the board. This

section provides an overview of the panels available for Atomix HDMI.

2.3.1 Note About the Audio Setup

Atomix HDMI provides up to 16 channels digital audio (AES/EBU).

With this up to two panels for audio can be delivered with the Atomix

HDMI:

– One that has to be connected to the AUDIO 1-8/LTC connector on

the Atomix HDMI board (in this guide referred to as ’audio

panel #1’).

– One that has to be connected to the AUDIO 9-16 connector on the

Atomix HDMI board (referred to as ’audio panel #2’).

There are two types of panels for audio available:

– One with analog and digital audio connections (called ’audio

panel’, see section “Audio Panel” on page 2-12).

– One with digital audio plus RS-422 connection (called ’audio and

RS-422 panel, see section “Audio and RS-422 Panel” on

page 2-11).

The following tables show the possible combinations of the two types

of panels and their recommended installations:

When only one panel for audio has been delivered to you, it should al-

ways be set up as audio panel #1 (i.e. connected to AUDIO 1-8/LTC).

Please note that the panels are optionally available and will be

part of your delivery only if you have ordered them.

Delivered Panels Install as…

1 × audio panel audio panel #1 (AUDIO 1-8/LTC)

1 × audio panel audio panel #2 (AUDIO 9-16)

Delivered Panels Install as…

1 × audio panel audio panel #1 (AUDIO 1-8/LTC)

1 × audio and RS-422 panel audio panel #2 (AUDIO 9-16)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Pas de commentaire

DVS Atomix HDMI Guide d'installation Page 27